|
Features:
- High resolution graphical OLED screen with 128x64 pixels
- Programming procedure using the SensorSwitch in conjunction with the OLED screen
- 11 channels + 1 channel for the door sequenzer
- Signal amplification for a total of 11 channels and 21 servos
- 4 match channels
- Double regulated output voltage
- Energy consumption, voltage- and residual capacity display in mAh for both batteries
- Sockets for telemetry bus systems Multiplex MSB and Spektrum
- Data feedback by downlink - i.e. for data such as voltage, consumption and residual capacity for both batteries
- Selectable servo voltage of 5,9V or 7,4V
- Minimum value memory displays voltage collapses in flight
- Large area heat-sink area for heat dissipation and even higher performance
- Supports three battery types: NiMh/NiCd, LiFePo
- Suppression of servo feedback currents
Specification:
- Operating voltage: 4,0 Volts to 9,0 Volts
-
Power source:
2 x two-cell LiPO batteries 7,4 Volts
2 x five-cell NiCd or. NiMH batteries
2 x two-cell LiFePo batteries 6,6 Volts (A123)
- Current drain:
Power-on state approx. 130 mA
Power-off state approx. 15 µA
- Dropout voltage: approx. 0,25 V
- Max. receiver- and servocurrent:
2 x 10 A (stabilised), according to efficiency of cooling
Peak 2 x 20 A
- Servo signal resolution: 0,5µs
- Signal frame rate:
User variable: 9ms, 12ms, 15ms, 18ms, 21ms
- Screen: OLED 128 x 64 pixels, graphic
- Bus systems: Spektrum, Multiplex
- Servo sockets: 21 sockets, 11 channels, 4 of them match-channels,
single-channel door sequencer with 6 servo sockets
- Temperature range: - 30 °C to + 75 °C
- Dimensions: 110 x 72 x 24 mm
(incl. base plate)
- Weight: 115 g
- SensorSwitch: 15 g
- EMV approval: EN 55014-1:2006
- CE approval: 2004/108/EG
 
Operating Instructions (PDF 8,3 MB)
PowerBox Sensor (PDF 117 KB)
Certification (PDF 39 KB)
... more information to the PowerBox Cockpit
Price incl. Sensorswitch
€ 359,-
incl. VAT
plus carriage costs
 top of page
|
|
|
